MIL-PRF-39012/80F
TABLE IV. Group qualification and retention testing.
Qualifies the
Submission and qualification of
following dash
Group
any of the following dash
numbers 1/ 2/ 3/
numbers
M39012/
M39012/
80-*01
80-*02
80-*02
I
80-*03
80-*04
II
80-*04
80-*06
80-*05
III
80-*06
80-*07
80-*08
80-*08
IV
80-*11
80-*12
80-*09
80-*10
80-*10
V
80-*207
80-*208
80-*211
80-*212
80-*208
80-*307
VI
80-*308
80-*311
80-*312
80-*210
80-*213
VII
80-*210
80-*310
80-*313
1/ Individual connectors other than listed are self qualifying only.
2/ Qualification of connectors qualifies connectors of the same material only.
3/ Connectors qualified with safety wire holes automatically qualifies connectors without
safety wire holes.
* Denotes body material and connector requirement.
NOTE: If a connector manufacturer produces a connector which meets all the requirements for two or
more connector PINs (within the same series), the manufacturer may receive qualification approval for
two or more connector PINs by qualifying the one connector. It is not necessary that such
connectors be in the same group. Each connector, however, must be marked with its own
appropriate PIN. For group qualification, the connectors must be of similar design.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business