MIL-PRF-39012/83G
TABLE I. Dash numbers, cross-reference, and dimensions Continued. @
Dash
Dimension A
number
Applicable
Tool
Positioning
Locator
Crimp
Dim.
M39012/83-
cable
number
dies
pins
dies
B
Before
After
1/
M22520/
8/
M22520/5
M22520/
crimping
crimping
M17/
M22520/36
9/
CATEGOR F FIELD REPLACEABLE (MIL-DTL-22520 CRIMP TOOL) 2/
3207 10/
133-
4207 910
RG405 *#
36-02
36-01
-05, -17 or
-22
.725
.620
--------
(18.42
(15.7
3208 10/
130-
mm)
mm)
4208 10/
RG402 *
36-03
N/A
maximum maximum
6/
3210
130-
4210
RG402 *#
5-01
--------
--------
-05 or -41
.691
.691
cavity B
(17.55
(17.55
mm)
mm)
maximum
maximum
3213
133-
4213
RG405 *#
5-01
--------
--------
-05 or -41
.624
.624
N/A
cavity B
(15.85
(15.85
mm)
mm)
maximum
maximum
1/ MIL-DTL-17 cables are specified by the basic number. The latest version of each cable shall be
applicable.
2/ These connectors have captivated center contacts.
3/ Kit number Omni Spectra T-200, Amphenol 901-2500, or equivalent.
4/ All corrosion resistant steel bodied connectors shall be gold plated in accordance with ASTM B488,
type II, code C, class 1.27, at least in the area of solder attachment.
5/ Inactive for new design. Not for Air Force or Navy use.
6/ This dimension is furnished in the manufacturers assembly instructions.
7/ Parts have a .437 inch (11.10 mm) hex flange and a .375 inch (9.52 mm) hex jam nut.
8/ The locators required shall be indicated in the assembly instructions.
9/ The A dimension before crimping determines the closeness of a bend in the cable to the rear of the
connector.
10/ Not for Army use. For OEM use only.
@ Dimensions are in inches. Metric equivalents are given for information only.
* Cable to be used when performing test requiring cable. All cable dash numbers on this MIL-DTL-17
specification sheet accommodate this connector.
# These cables are stripped using the dimensions as specified on figure 2.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business