MS24265R
Size of contact |
Type of contact |
AA |
BB |
CC dia min |
DD |
EE dia |
GG max |
12 |
Solder Cup |
.150 (3.81) |
.112 (2.84) |
.095/ .093 (2.41) (2.36) |
.235 (5.97) |
||
12 |
Eyelet |
.035 (0.89) |
.200 (5.08) |
||||
16 |
Solder Cup |
.103 (2.61) |
.069 (1.75) |
.063/ .061 (1.60) (1.55) |
|||
16 |
Eyelet |
.025 (0.64) |
.125 (3.18) |
||||
20 |
Solder Cup |
.077 (1.96) |
.042 (1.07) |
.041/ .039 (1.04) (0.99) |
.165 (4.19) |
||
20 |
Eyelet |
.015 (0.38) |
.080 (2.03) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. All diameters to be concentric with each other within .015 T.I.R.
4. All diameters in the same plane to be concentric with each other within .004 T.I.R.
5. True position (T.P.) tolerances specified are for maximum material conditions (M.M.C.).
6. Distance between end of shell and the point at which a gauge pin having the same basic diameter as the mating contact and a square face, engages socket contact spring.
7. Dimensions on pin and socket contact locations and end of shells to insert faces apply when contacts are placed in inserts for inspection or application.
8. Dimensions .133 may reduce to .118 minimum under pressure caused by molded cable assemblies or sharp cable bends. Use tool MIL-I-81969/17 to assemble contacts into this connector, and use tool MIL-I-81969/19 to remove contacts from this connector.
FIGURE 6. Receptacle dimensions - Continued.
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business