For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-2036 Enclosures For Electric And Electronic Equipment, Naval ShipboardThis specification covers requirements for enclosures that house electric and electronic equipment for Naval shipboard use. Details concerning construction, ventilation, cooling, and mechanical protection are included in this specification. This specification also covers that class of explosion proof equipment which will contain any spark or ignition within the enclosure and not permit ignition in the surrounding external atmosphere as a result of normal operation or failure of electrical circuits within the enclosure. This specification is not intended to cover enclosures which form an integral part of equipment such as batteries.

Pages 1 - |||9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27|||


. . .
MIL-DTL-2036E
APPENDIX A
EXPLOSIONPROOF ENCLOSURES
A.1 SCOPE
A.1.1 Scope. This appendix covers the construction, testing and design approval procedures for
explosionproof enclosures for electrical and electronic equipment intended for use in explosive
atmosphers normally found on board Naval ships, most of which are listed in group D of the National
Electric Code, and among others include: gasoline, hexane, naptha, benzene, butane, alcohol, benzol,
lacquer solvent vapors, or natural gas. This appendix is a mandatory part of this specification. The
information contained herein is intended for compliance.
A.2 APPLICABLE DOCUMENTS
A.2.1 Government documents.
A.2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARD
FED-STD-H28/2 - Screw-Thread Standards for Federal Services, Section 2, Unified Inch Screw
Threads ­ UN and UNR Thread Forms.
MILITARY SPECIFICATION
MIL-DTL-16685
- Packing, Material and Packing Preformed (Stuffing Tube for Electric Cables).
MILITARY STANDARD
MIL-STD-810
- Environmental Test Methods and Engineering Guidelines.
(Copies of these documents are available online at https://quicksearch.dla.mil/ or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
A.2.2 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of documents are those cited in the solicitation or
contract.
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NATIONAL ELECTRIC CODE (NEC) ­ NFPA-70
(Copies of these documents are available online at https://www.nfpa.org or from the National Fire
Protection Association, 1 Battery March Park, Quincy, MA 02269-9101.)
NATIONAL ELECTRIC MANUFACTURERS ASSOCIATION (NEMA)
NEMA Standard 250 ­ Enclosures for Electrical Equipment (1000 Volts Maximum).
(Copies of these documents are available online at https://www.nema.org or from the National Electrical
th
Manufacturer's Association, 1300 North 17 Street, Suite 1847, Rosslyn VA 22209.)
18



For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.