8 inch printed wiring boards, and for interconnections between printed wiring boards. The connectors are intended to provide a reliable connection between printed wiring and conventional wiring. The interconnector concept is intended to provide connection of printed wiring on one board to printed wiring on another board.

Pages 1 - - 2 - 3 - 4 - 5 - 6 - 7 - 8|||9 - 10 - 11 - 12 - 13|||

MIL-DTL-21097G

INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)

ISO 10012-1 � Equipment, Quality Assurance Requirements for Measuring, Part 1: Meteorological

Confirmation System for Measuring Equipment.

(Copies of these documents are available online at https://www.iso.ch or International Organization for Standardization

American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036.)

NATIONAL CONFERENCE of STANDARDS LABOR (NCSL)

NCSL Z540-1 - Laboratories, Calibration, and Measuring and Test Equipment.

(Copies of these documents are available online at https://www.ncsli.org or from NCSL International 2995 Wilderness

Place, Suite 107 Boulder, Colorado 80301-5404)

SOCIETY OF AUTOMOTIVE ENGINEERS, INC (SAE)

SAE-AMS-QQ-P-416

Plating, Cadmium (Electrodeposited)

SAE-AMS-P-81728

Plating, Tin-Lead (Electrodeposited).

SAE-AMS 2418

Copper, Plating.

SAE-AMS-2700

Passivation Of Corrosion Resistant Steel.

SAE-AMS2403

Nickel Plating (Electrodeposited).

(Copies of these documents are available online at https://www.sae.org or from the Society of Automotive Engineers,

400 Commonwealth Drive, Warrandale, PA 15096-0001.)

THE INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS (IPC)

IPC-D275 - Design Standard for Rigid Printed Boards and Rigid Printed Board Assemblies

(Copies of this document are available online at https://www.ipc.org or from IPC, 2215 Sanders Road, Northbrook, IL

60062-6135.)

2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited herein

(except for related specifications sheets), the text of this document takes precedence. Nothing in this document,

however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the

applicable specification sheet. In the event of any conflict between the requirements of this specification and the

specification sheet, the latter shall govern.

3.2 Qualification. Connectors and accessories furnished under this specification shall be products that are

authorized by the qualifying activity for listing on the applicable qualified products list before contract award (see 4.6 and

3.2.1 Quality.

3.2.1.1 Statistical process control (SPC). The contractor shall implement and use SPC techniques in the

manufacturing process for parts covered by this specification. The SPC program shall be developed and maintained in

accordance with EIA-557. Where SPC cannot be utilized because of non-continuous production requirements, a lot

sampling plan for inspection in accordance with group A lot and sample size with c = 0 can be utilized. The SPC and c

= 0 programs shall be documented and maintained as part of the overall reliability assurance program as specified in

EIA-557. Evidence of such compliance shall be verified by the qualifying activity of this specification as a prerequisite

for qualification.