MIL-DTL-22992G
3.32 Marking of contacts (class L). Marking of contacts for class L connectors shall consist of three
color bands as specified (see 3.1). The location of the color bands shall be in accordance with the
applicable specification sheets as specified (see 3.1).
3.33 Workmanship. Connectors, adapters, protective covers, and stowage receptacles shall be
processed in such a manner as to be uniform in quality and shall be free from defects that will affect life,
serviceability, or appearance. There shall be no evidence of poor molding or fabricating, damaged or
improperly assembled contacts, peeling or chipping of the plating and finish, excessive flash which
would indicate improper molding, nicks or burrs to metal surfaces.
3.34 JAN brand. The United States Government has adopted, and is exercising legitimate control
over, the certification marks "JAN" and "J", respectively, to indicate that items so marked or identified are
manufactured to, and meet all the requirements of specifications. Accordingly, items acquired to, and
meeting all of the criteria specified herein and in applicable specifications shall bear the certification mark
"JAN" except that items too small to bear the certification mark "JAN" shall bear the letter "J". The "JAN"
or "J" shall be placed immediately before the PIN except that if such location would place a hardship on
the manufacturer in connection with such marking, the "JAN" or "J" may be located on the first line above
or below the PIN. Items furnished under contracts or orders which either permit or require deviation from
the conditions or requirements specified herein or in applicable specifications shall not bear "JAN" or "J".
In the event an item fails to meet the requirements of this specification and the applicable specification
sheets, the manufacturer shall remove completely the military PIN and the "JAN" or the "J" from the
sample tested and also from all items represented by the sample. The "JAN" or "J" certification mark
shall not be used on products acquired to contractor drawings or specification. The
United States Government has obtained Certificate of Registration Number 504,860 for the certification
mark "JAN" and Registration Number 1,586,261 for the certification mark "J".
Note: The "JAN" or "J" is not part of the PIN but indicates a certification.
3.35 Change effectivity. Unless otherwise specified by the preparing activity and/or the qualifying
activity, all changes from the previous revision of MIL-DTL-22992 shall become effective within 90 days
from the date of publication of the latest revision. If unable to implement changes within the 90 day time
period, additional time shall be requested from the qualifying activity. Manufacturers that are QPL listed
and have concerns regarding possible changes to retention reporting requirements should contact the
qualifying activity for clarification.
3.36 Disposition of stock. Unless otherwise specified by the preparing activity and/or the qualifying
activity, qualified manufacturers and their selling agents or distributors may ship from stock; connectors
and accessories which were manufactured in accordance with the previous revision of MIL-DTL-22992 for
a period of 18 months from the date of the latest revision, provided that form, fit and function
requirements are not affected.
3.37 Marking. The receptacle and plug connectors and accessories shall be permanently marked
with the manufacturer's name or trademark, date code, "JAN" or "J" prefix, and the following information,
permits.
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business