MIL-DTL-55235A
5. PACKAGING
5.1 Packaging requirement. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department of Defense Agency, or within the Military Department's
System Command. Packaging date retrieval is available from the managing Military Department's or
Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. Connectors covered by this specification are intended for use in radio frequency
applications up to 10 Gigahertz. They are designed for use with small size 50 ohm cables. Their use is
governed by temperature limitations of their associated cables.
6.2 Ordering data. Procurement documents should specify the following:
(a)
Title, number, and date of this specification and any amendment thereto
(b)
Type required.
(c)
Level of packaging and level of packing required for shipment (level A, level B or level C).
(d)
The specific paragraphs of section 5 which are applicable to the particular procurement.
(e)
Place of final inspection.
6.3
Group C inspection. Approval to ship may be withheld, at the discretion of the Government,
pending the decision from the contracting officer on the adequacy of corrective action (see 4.5.3.2).
6.4
Nomenclature. The parentheses in the nomenclature will be deleted or replaced by a letter
identifying the particular design; for example UG-1364W/U. The contractor should apply for the
nomenclature in accordance with the applicable clause in the contract (see 1.1).
6.5
Verification inspection. Verification by the Government will be limited to the amount deemed
necessary to determine compliance with the contract and will be limited in severity to the definitive quality
assurance provisions established in this specification and the contract. The amount of verification
inspection by the Government will be adjusted to make maximum utilization of the contractor's quality
control system and the quality history of the product.
6.6 Subject term (key word) listing.
Nickel
VSWR (Voltage Standing Wave Ratio)
CONCLUDING MATERIAL
Custodian :
Preparing activity:
Army CR
DLA - CC
Air Force - 11
DLA - CC
(Project 5935-4431-000)
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business