MIL-DTL-55235A
ASTM-B488 -
Gold for Engineering Uses, Electrodeposited Coating of.
ASTM B700 -
Electrodeposited Coatings of Silver for Engineering Uses.
ASTM D2116 -
FEP Fluorocarbon Molding and Extrusion Materials.
(Applications for copies should be addressed to the American Society For Testing And Materials, 100
Barr Harbor Dr., West Conshohocken, PA 19428.)
INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS
J-STD-004 Soldering Fluxes, Requirements For
J-STD-005 Soldering Pastes, Requirements For
J-STD-006 Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders For
Electronic Soldering Applications, Requirements For
(Applications for copies should be addressed to the institute for Interconnecting and Packaging
Electronic Circuits, 2215 Sanders Road, Northbrook, IL 60062.)
SOCIETY OF AUTOMOTIVE ENGINEERS
SAE- AMS-H-7199 Heat Treatment of Wrought Copper-Beryllium Alloys, Process For
SAE-AMS-QQ-N-290 Nickel Plating (Electrodeposited)
(Applications for copies should be addressed to the Society of Automotive Engineers, Inc., 400
Commonwealth Drive, Warrendale PA, 15096-0001.)
3
REQUIREMENTS
3.1 General. The connectors covered by this specification shall be constructed using the
drawings specified on the drawing and data lists referenced in 2.1 as a guide for informational purposes.
Dimensional deviations from these drawings, except for the interchangeability, and outline and mounting
dimensions specified in 3.10 and 3.11 respectively, shall be permitted. Compliance with the performance
requirements of this specification, regardless of design details employed, shall determine the acceptability
of these connectors.
3.2 Pre-production samples. The contractor shall furnish six pre-production samples of each
type of connector for approval, provided the Invitation for Bids and the Contract requires samples (see
4.3).
3.3 Materials. Unless otherwise specified the material for each part shall be as specified
herein. When a definite material is not specified, a material shall be used which will enable the
connectors to meet the requirements of this specification. Acceptance or approval of any constituent
material shall not be construed as a guarantee of the acceptance of the finished product.
3.3.1 Brass. Brass shall conform to ASTM B16, ASTM B36, ASTM B121 or ASTM B124.
3.3.2 Beryllium copper. Beryllium copper shall conform to ASTM B194, ASTM B196 or
ASTM B197. Parts fabricated of copper beryllium shall be heat treated to Condition HT in accordance
with SAE-AMS-H-7199 after machining and forming.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business