.
INCH - POUND
MIL-DTL-83413C
15 August 2012
SUPERSEDING
MIL-DTL-83413B
22 September 2005
DETAIL SPECIFICATION
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers electrical aircraft grounding connectors and grounding
assemblies, including plugs, receptacles, grounding clamp, connectors, jumper cable assemblies,
and other accessories.
1.2 Classification.
1.2.1 Grounding assemblies. Grounding assemblies are classified as follows:
Type I
-
Plug and clamp connectors, both attached to specified cable.
Type II
-
Plug attached to specified cable.
Type III
-
Clamp connector attached to specified cable.
Type IV
-
Jumper assembly, lug to lug.
1.2.2 Other components. Other components are to be classified by name only.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for addition information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3, 4, or 5 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to DLA Land and
Maritime, Attn: VAI, PO Box 3990, Columbus, OH 43218-3990 or emailed to
RFConnectors@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business