MIL-STD-16988
5.2 Main key or keyway polarization (see figure 1).
a. Each insert arrangement is shown in the "normal position" in the shell.
b. In the "alternate keying position" the keys or keyways are positioned as indicated with reference to the master key or keyway.
5.3 Contacts. Contacts shall be in accordance with SAE-AS39029/83 and SAE-AS39029/84.
5.4 Marking. Marking shall be in accordance with MIL-DTL-28840 and as shown in the applicable section of this standard.
5.5 Drawing notes. The following information is applicable to all figures of this standard. a. Dimensions are in inches.
b. Metric equivalents are given for general information only.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This standard covers insert arrangements for use with MIL-DTL-28840. Information pertaining to shell size designator, arrangement number, shell size, number of contacts, size of contacts, service rating, and contact location is contained in this document.
6.2 Cross-reference. See table I for cross-reference of previous sections and current figures.
TA8LE I. Cross reference of figures to sections
Title |
Current figure |
Previous section |
Insert arrangement shell size 11 |
2 |
90 |
Insert arrangement shell size 13 |
3 |
10 |
Insert arrangement shell size 15 |
4 |
20 |
Insert arrangement shell size 17 |
5 |
30 |
Insert arrangement shell size 19 |
6 |
40 |
Insert arrangement shell size 23 |
7 |
50 |
Insert arrangement shell size 25 |
8 |
60 |
Insert arrangement shell size 29 |
9 |
70 |
Insert arrangement shell size 33 |
10 |
80 |
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business