MIL-DTL-83505B
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not
include documents cited in other sections of this specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified
requirement documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see
6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-DTL-83505/1
-
Sockets (lead, Electronic Components) (Type I, Solderless Wrap).
MIL-DTL-83505/2
-
Sockets (Lead, Electronic Components (Type II, Printed Circuit).
MIL-DTL-83505/6
-
Sockets (Lead, Electronic Components) (Type VI, Solderless Spring Contacts).
MIL-DTL-83734
-
Sockets, Plug-in Electronic Components, Dual-in-Line (DIPS) and Single-in-Line
Packages (SIPS) General Specification For.
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-202
-
Tests Methods for Electronic and Electrical Component Parts.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
MIL-STD-1344
-
Test Methods for Electrical Connectors.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Defense Printing
Service Detachment Office Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the
solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE, INC.
ANSI B46.1-78
- Surface Roughness, Waviness and Lay.
ANSI Y14.5-1973
- Dimensioning and Tolerancing for Engineering Drawings.
ANSI/NCSL Z540-1-1994
- Calibration Laboratories and Measuring and Test Equipment, General Requirements.
(Application for copies should be addressed to the American National Standards Institute, Inc. 1430 Broadway, New York, NY
10017.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B16
-
Rod, Bar, and Shapes for use in Screw Machines, Free Cutting Brass.
ASTM B139
-
Rod, Phosphor Bronze, Bar, and Shapes.
ASTM B194
-
Plate, Copper Beryllium Alloy, Sheet, Strip, and Rolled Bar.
ASTM B196
-
Rod and Bar, Copper Beryllium Alloy.
ASTM B488
-
Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses.
ASTM B740
-
Copper-Nickel-Tin Spinodal Alloy Strip.
(Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA
19103.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business