MIL-DTL-83513G
2.2.2 Other Government documents, drawings and publications. The following other Government
documents, drawings and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
JSC SP-R-0022
- Vacuum Stability Requirements of Polymeric Material for Spacecraft
Applications.
(Copies of these documents are available online at www.nasa.gov/centers/johnson/home/ or the NASA
Johnson Space Center 2101 NASA Parkway Houston, Texas 77058.)
DEFENSE SUPPLY CENTER COLUMBUS (DSCC)
04035
-
Wire, Electrical, Composite, Polytetraflouroethylene/Polyimide insulated,
Light Weight, Silver Coated, High Strength or Ultra High Strength Copper
Alloy, 200°C, 600 Volt
(Copies of these documents are available online at https://www.dscc.dla.mil/Programs/MilSpec/ or from
the Defense Supply Center Columbus, ATTN: VAI, P.O. Box 3990, Columbus, OH 43218-3990.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract (see 6.2).
ASME INTERNATIONAL
- Dimensioning and Tolerancing.
ASME Y-14.5
(Copies of these documents are available online at https://www.asme.org or from the ASME
International, Three Park Avenue, New York, NY 10016-5990.)
ASTM INTERNATIONAL
ASTM A342/A342M
- Standard Test Method for Permeability of Materials Feebly Magnetic
ASTM A693
- Precipitation Hardening Stainless and Heat Resisting Steel Plate, Sheet,
and Strip.
ASTM B85
- Aluminum-Alloy Die Castings, Standard Specification for.
ASTM B221
- Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Profiles and
Tubes.
ASTM B488
- Gold for Engineering Uses, Electrodeposited Coatings of.
ASTM B733
- Metal, Autocatalytic Electroless Nickel-Phosphorous Coatings on.
ASTM B841
- Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy
Deposits
ASTM D4067
- Standard Classification System for Reinforced and Filled Poly(Phenylene
Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM
Methods
ASTM D5138
- Liquid Crystal Polymers, Standard Specification for.
- Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based
ASTM D5927
on ISO Test methods, Standard Specification for.
ASTM D5948
- Compounds Molding, Thermosetting.
ASTM E595
- Material from Outgassing in a Vacuum Environment, Total Mass Loss
and Collected Volatile Condensable, Standard Test Method for.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business