MIL-DTL-83502E
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202 -
Tests Methods for Electronic and Electrical Component Parts.
MIL-STD-810 -
Environmental Test Methods.
MIL-STD-1285 -
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, issues of these documents are those cited in the solicitation
or contract.
ASTM INTERNATIONAL
ASTM B16/B16M
-
Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
ASTM B139/B139M
-
Rod, Phosphor Bronze, Bar, and Shapes
ASTM B194
-
Plate, Copper Beryllium Alloy, Sheet, Strip, and Rolled Bar
ASTM B196/B196M
-
Rod and Bar, Copper Beryllium Alloy
ASTM D1710
-
Tubing, Extruded and Compression Molded Polytetrafluoroethylene (PTFE)
Rod and Heavy-Walled
ASTM D4066
-
Standard Specification for Nylon Injection and Extrusion Materials (PA)
ASTM D5948
-
Standard Specification for Molding Compounds, Thermosetting
(Copies of these documents are available online at https://www.astm.org or from the ASTM International,
P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business