MIL-DTL-83502E
ELECTRONIC INDUSTRY ALLIANCE (EIA)
EIA-364
-
Electrical Connector/Socket Test Procedures Including Environmental
Classifications
EIA-364-06
-
Contact Resistance Test Procedure for Electrical Connectors
EIA-364-20
-
Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and
Coaxial Contacts
EIA-364-21
-
Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and
Coaxial Contacts
EIA-364-23
-
Low Level Contact Resistance Test Procedure for Electrical Connectors and
Sockets
EIA-364-27
-
Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors
EIA-364-28
-
Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-30
-
Capacitance Test Procedure for Electrical Connectors and Sockets
EIA-364-31
-
Humidity Test Procedure for Electrical Connectors and Sockets
EIA-364-32
-
Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors
and Sockets
(Copies of these documents are available online at https://www.eia.org or from the Electronic Industries
Alliance, Technology Strategy & Standards Department, 2500 Wilson Boulevard, Arlington, VA 22201.)
IPC - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES
J-STD-004
-
Soldering Fluxes Requirements For
J-STD-006
-
Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for
Electronic Soldering Applications Requirements For
(Copies of these documents are available online at https://www.ipc.org or from the IPC - Association
Connecting Electronics Industries, 3000 Lakeside Drive, Suite 309 S, Bannockburn, IL 60015-1249.)
SAE INTERNATIONAL
SAE-AMS-P-81728
-
Plating, Tin-Lead (Electrodeposited).
SAE-AMS-QQ-N-290
-
Nickel Plating (Electrodeposited).
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business