MIL-STD-1669A
c. In the "normal position" the indexing radius coincides with the 
of the "master key or keyway of the shell".
d. In "alternate insert positions" the pin insert is rotated "A" degrees clockwise relative to 
of
"master key or keyway of shell" as indicated.
e. In "alternate positions" the socket insert is rotated "A" degrees counter-clockwise relative to 
of "master key or keyway of shell".
f. See applicable section of this standard for insert positions.
g. Four keys or keyways (maximum material condition) (MMC) and insert shall be located within
.0035 either side of true position (TP) relative to master key or keyway (MMC) and shell outside diameter or inside diameter (MMC).
5.3 Contacts. Solder contacts shall be in accordance with MIL-DTL-26482. Crimp contacts shall be in accordance with applicable document as specified in table I.
TABLE I. Crimp contacts.
Contact size |
Applicable documents |
|
Series 1 |
Series 2 |
|
20 Power |
SAE-AS39029/31, SAE-AS39029/32 |
SAE-AS39029/4, SAE-AS39029/5 |
16 Power |
SAE-AS39029/31, SAE-AS39029/32 |
SAE-AS39029/4, SAE-AS39029/5 |
12 Power |
SAE-AS39029/31, SAE-AS39029/32 |
SAE-AS39029/4, SAE-AS39029/5 |
12 Shielded |
SAE-AS39029/25, SAE-AS39029/26 |
SAE-AS39029/7, SAE-AS39029/8 |
8 Shielded |
SAE-AS39029/23, SAE-AS39029/24 |
------- |
20 Thermocouple |
------- |
SAE-AS39029/9, SAE-AS39029/10 |
20 Hermetic (class N) |
------- |
SAE-AS39029/22 |
16 Hermetic (class N) |
------- |
SAE-AS39029/22 |
5.4 Marking. Marking shall be in accordance with MIL-DTL-26482 and as shown in the applicable section of this standard.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This standard covers insert arrangements for use with MIL-DTL-26482 environment resisting, circular, electrical connectors. Information pertaining to the shell size, arrangement number, number of contacts, service rating, contact location and superseding information is contained in this document.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of the standard.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business