MIL-STD-1669 Insert Arrangements For Mil-Dtl-26482 Environment Resisting, Circular, Electrical ConnectorsThis standard covers insert arrangements for use with MIL-DTL-26482 environment resisting, circular, electrical connectors.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67

MIL-STD-1669A

w/CHANGE 1

1.  SCOPE

1.1  Scope.  This standard covers insert arrangements for use with MIL-DTL-26482 environment resisting, circular, electrical connectors.

2.   APPLICABLE DOCUMENTS

2.1  General.  The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples.  While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.

2.2  Government documents.

2.2.1  Specifications, standards, and handbooks.  The following specifications, standards, and handbooks form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-DTL-26482         -  Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment

Resisting), Receptacles and Plugs, General Specification for

(Copies these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the

Standardization Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-

5094.)

2.2.2  Non-Government publications.  The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

ASME INTERNATIONAL

ASME Y14.5M       -     Dimensioning and Tolerancing

(Copies of these documents are available online at https://www.asme.org or from the ASME International, Three Park Avenue, New York, NY  10016-5990.)

SAE INTERNATIONAL

SAE-AS39029/4           Contacts, Electrical Connectors, Pin, Crimp Removable, (for MIL-C-26482

Series 2, MIL-C-81703 Series 3 and MIL-C-83723 Series I and III, and

MIL-C-83733 Connectors)

SAE-AS39029/5           Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-

26482 Series 2, AS81703 Series 3, MIL-C-83723 Series I and III, and MIL- C-83733 Connectors and MIL-S-12883/40 and /41 Relay Sockets)

1